HOME AND GARDEN

Click here to buy!

yeechoice Store

Wireless Home Security System ~ Alarm with Auto Dialing function ~ ~ 32 Guard Zones ~
Easy to add Detectors, Remote Control & Wireless Siren anytime.
System will call your mobile or your friend when triggered
No cabling required, easy plug & play installation
Bundled internal Transmitter for Wireless Siren
No service fee, your home is secured!

(a telephone land line is required for alarm auto dialing)

Wireless Home Security System # T26-14-01w

 

Keypad/Control Panel : 
1 pce

Remote Control :   
2 pcs

Motion Detector : 
6 pcs

Door/Window Detector :
14 pcs

 

Wireless Siren
  1 pce

Wired Siren :
  1 pce

Phone cable/user manual:
  1 pce

 

PACKAGE CONTENT

Quantity

Component

1
Wirless Alarm System Control Panel/Main Unit (with AC adapter)

2

Remote Control

6

Motion Detector (with Wall Mounting)

14

Door / Window Entry Detector

1

Wireless Siren

1

Wired Siren

1

Telephone cable / English manual

4

FREE Security Sticker (2 pcs adhesive side at front and 2 pcs adhesive side at back) * All necessary batteries are included in the package. * Alarm System and detectors will be preset before shipped to customer. User just need to input the phone number for alarm auto dailing.

Main Feature / Introduction

Main Unit will receive signal from detectors when detectors detected any guard zone was triggered/intruded.   At the same time, siren will sound loudly and Main Unit will auto dial to the phone number have been preset.

Support up to 32 guard zones.   Each guard zone can be linked to not more than 20 pcs detectors.

Up to 5 groups phone number can be preset in the system for auto dailing.

10 seconds alert message can be recorded. The person can hear the alert message when receive the auto call from the system.

Build-in Rechargeable battery which is for power cut off suddenly (only for backup around 24 hrs).

Build-in transmitter module for Wireless Siren. And you can connect more than one Wireless Siren.

Long distance operate when you are not at home. You can dial to your system(your home) with other telephone or mobile. Press the numeric key mentioned in the user manual to Arm or Disarm. Of course a password is required.

User can add or cancel Remote Control. No need to worry if you lost a Remote Control or you would add a Remote Control

User can add detector, wireless siren or change setting any time.

Optional to enable/disable the function for absent telephone line alarm

Optional to set the delay time of arm when press arm key in Control Panel

3 Arm mode: Arm Away mode, Arm at Home mode & Emergency mode. (example.. Motion Detector can be set to Arm Away mode, Door/Window Detector to Arm at Home Mode, Smoke Detectos can be set at Emergency mode..etc).

Display with led light showing which guard zone was triggered.

Note : This system is designed for self protect. No alarm center or monitor service provided in this system.

Introduction / Specification

Control Panel / Main Unit (with AC Adapter)  

- Number of Guard Zones : 32 Guard Zones
- Receive frequency : 315Mhz ±0.5MHz (for Detectors & Remote Control)
- Transmit frequency : 433MHz ±0.5MHz (for Wireless Siren)
- Static current : Is <35mA
- Alarm current : Ia <280mA
- Wireless interference Rejection: >40dB(30-1000MHz)
- Wireless received sensitivity: -95dBm@12dB SINAD
- Operating Temperature : -15°C ~ 55°C (approx 5°F ~ 130°F)
- Humidity : ≤ 90 % - Emission distance : 240-500 feet
- Power Supply : 12V DC (Package included an AC Adapter with Input:100~240V/Output:12V DC)

- Build in Rechargeable battery for using during power cutoff (support around 24 hours)

 

Remote Control

- Wireless remote control.
- 3 Arm Mode: Arm Away Mode, Arm at Home Mode & Emergency Mode (panic button).
- Arm the system after closed the door when go out. Disarm the system before open the door when come back.
Specification :-
Power : 12V battery x 1 pce (battery included)
Static Current: I1 = 0 Transmission Current: I2 ≤ 15mA
Transmission Frequency: 315MHz ± 0.2MHz Transmission Time: ≧1s
Transmission Distance : 80m (No Obstacle) Operational temperature: ：-10℃ to 40℃ (approx 14°F ~ 104°F)
Humidity: ≤ 90%

Motion Detector (with wall mounting)

 

- Suitable for bedroom, living, kitchen, lobby, corridor...etc.
- Power Supply : 9V battery x 1 pce (battery included)
- Static current : I1≤30mA - Alarm current : I2≤20μA
- Transmission Frequency : 315 MHz ±0.2MHz - Transmission Time : ≧1s
- Detected Distance : 5-8m
- Transmit Distance : approx 100m (no obstacle)
- Detect angle : Horizontal: 110ﾟ, Vertical: 60ﾟ
- Working Condition : Temperature : -10°C ~ 40°C (approx 14°F ~ 104°F)
- Humidity : ≤ 90 %
 

Door / Window Detector
 
     

- Suitable for Door, Window, drawer, cabinet...etc
- Power Supply : 12V battery x 1 pce (battery included)
- Static current : I1≤15mAμA
- Alarm current : I2≤15mA
- Transmit frequency: 315 ±0.2MHz
- Transmission Time : ≧1s
- Transmit distance : approx 100m(no obstacle)
- Internal distance : 15mm
- Temperature: -10℃ to 40℃ (approx 14°F ~ 104°F) - Humidity: less than 90%

 

Smoke Detector

-Will send alert message to the Main Unit/Control Panel while detect smoke.
Specification :-
Power Supply : 9V battery x 1 pce (battery included)
Frequency: 315MHz Sensitivity of smoke: accord with UL NO.217 standard
Transmit Distance to Control Panel: approx 100m
Operational temperature: ：-5℃ to 50℃ (approx 23°F ~ 122°F)
Humidity: 10% to 90%

 

Panic Button

Just press it when emergency. suitable for senior or quoz. Just press the button and will send signal to the Security System. Specification :-
Power Supply : 12V battery x 1 pce (battery included)
Transmission Current: I2 ≤ 15mA
Transmission Frequency: 315MHz ± 0.2MHz Transmission Time: ≧1s
Transmission Distance : approx 60m (No Obstacle)
Operational temperature: ：-10℃ to 40℃ (approx 14°F ~ 104°F) Weight : 0.85 oz
Dimension : 63mm x 36 mm x 15 mm Humidity: ≤ 90%

Glass Break Detector

- Used to identify glass break or crash sound from other sounds by frequency.

- Will send signal to the Alarm System Main Unit when detect glass break sound.

- Install to ceiling or wall close to window

 
Specification :-
Power Supply : 12V DC (AC Adapter with Input:100~240V/Output:12V DC is included)
Work Frequency : 315MHz
Detect Range : Horizontal: 90°; vertical: 75° , Area: 250sq.ft.
Operational temperature: ：-10℃～+50℃ (approx 14°F ~ 122°F)
Humidity: ≤90%
Dimension : 90 × 67 × 25 mm (approx) / Weight: 160g (approx)

Gas Detector

- Will send signal to Alarm System when detect leak of gas.

- Type of gas sensed : Natured gas, town gas, LPG.

 

Specification :-
Power Supply : 100-120V AC (suitable for in USA. If you need 220-240V, please indicated when place order)
Work Frequency : 315MHz
Receive distance from Control Panel: approx 100m (no obstacle)
Sensitivity : Propane LEL: 2.1 Vol% / HEL(UEL):9.5 Vol%
Operational temperature: ：-10℃～+50℃ (approx 14°F ~ 104°F)
Ambient Humidity : ≤95%
Dimension : 43 x 110 x 142 mm (approx) / Weight : 270g (approx)

Beam Entry Detector

- Beam Entry Detector will send signal when somebody entry between the 2 bar.

- Suitable for entrances, exit, garage, balcony...etc

 
Specification :-
Power Supply : 12V DC (AC Adapter with Input:100~240V/Output:12V DC is included for each bar)
Range distance : approximate 20m at outdoor / 60m at indoor
Operation Frequency : 315MHz
Transmit Signal distance to Control Panel: approx 80m (no obstacle)
Operational temperature: ：-10℃～+50℃ (approx 14°F ~ 122°F)
Humidity: ≤90%

Wireless Siren

- Wireless Siren will receive signal from Main unit/Control Panel when trigger.

- loud with 110 dB which will scare the burglar and alert your neighbour at the same time.

- No cable link to the Control Panel. It can be installed far from the Control Panel(eg. near the door or window). By the way, invader is not easy to locate the Control Panel.

- Each Alarm System can connect more than One wireless siren

 
Specification :-
Power : 12V DC (AC Adapter Input:100-240/Output:12VDC included)
Sound : 110 dB/m
Receive frequency : 433 MHz
Receive signal distance from Control Panel: approx 100m (no obtstacle)
Working current : 150～ 200mA
Operational temperature: ：-15°C ~ 55°C (approx 5°F ~ 130°F)
Humidity: ≤90%

Wireless Strobe Siren

- Wireless Siren will receive signal from the Wireless Alarm System when triggered.

- It will sound and flash at the same time when receive signal from Alarm System.

- loud with 110 dB which will scare the burglar and alert your neighbour at the same time.

- No cable link to the Control Panel. It can be installed far from the Control Panel(eg. near the window or door). By the way, invader not easy to locate the Control Panel.

- You can connect more than One Wireless Strobe Siren to our Wireless Home Alarm System

 
Specification :-
Power : 12V DC (AC Adapter Input:100-240/Output:12VDC included)
Sound : 110 dB Receive frequency : 433 MHz
Receive signal distance from Control Panel : approx 100m (no obstacle)
Working current : 150～ 200mA
Operational temperature: ：- 25～+55°
Humidity: ≤90%

Wired Siren

- Easy to install (just plug in) to the Control Panel/Main Unit.

- loud with 110 dB while the alarm system is triggered.

  Specification :-
Sound : 110 dB/m
Working current : 150～ 200mA
Operational temperature: ：- 25～+55°
Humidity: ≤90%

AC Adapter

- For the Control Panel/Main Unit, Glass Break Detector, Wireless Siren, Wireless Strobe Siren & Beam Entry Detector ..etc.
Specification :-
Input : 100-240V AC Output : 12V DC

Others / Accessories

- Telephone Cable - English manual

PAYMENT

Payment Method

PayPal

(Payment are expected to receive within 3 days after the auction ended. If payment have not completed in 7th days, an unpaid order case will be reported to ebay and order will be cancelled.

Shipping & Handling

Item will be shipped within next 48 hours once we received the cleared payment (except Sat, Sun and Public Holiday). *The system will be programmed before shipped.

Items will be shipped by USPS Priority Mail (Tracking number will be updated in ebay after shipped)

Shipping time within US is around 2 to 5 days.

Shipping time for others countries will be depend.

Please kindly accept/understand a delay when customs inspection required.

Buyer is responsible for any other tax if needed.

Terms and Others

Warranty : 3 month

We accept return. All items must be returned within 14 days(please get our authorize before return).
And must be in original condition and packaging in order to have full refund. Buyer is responsible for shipping cost.

For DOA (Dead on Arrival), which will be replaced or refund. But please inform us within 3 days upon you received the items. Please also keep all component & original packaging. And a photo may be required which will help the process.

Buyer is responsible for the shipping cost except if the item was found DOA.

Buyer is responsible for any other tax if needed.

If you are not satisfied, have question or comment, please do not hesitate to contact us by email. We will revert it ASAP as your fully satisfaction is our goal.

Find more details about this item...

Comments are closed.